Rapid “Clicks” at all the Ads can, definitely, be ensured at any Blog page. Here are some opinions:
(1) A Blogger should never trade any matter or information, whatsoever, unless the reports always show rapid increase in the number of “Clicks” at all the Ads, at the respective Blog pages.
(2) The Google AdSense policy should, also, devise the mechanism to increase traffic at all the Blog pages which show rapid increase in the number of “Clicks” at all the Blogs, at all the respective Blog pages.
(3) High density of traffic at Blog pages inspires the respective Bloggers to produce more unique matters or information, whatsoever, at their respective Blog pages. Therefore, the visitors should, also, “Click” at all the Ads, at all the Blog pages they visit, in order to ensure their own gains on the Internet. Thus, the relevance of the Internet would be made more meaningful.
Thursday, December 13, 2007
Saturday, September 08, 2007
It is sheer thrill to see the batsmen completing bye runs, even when the ball reaches straight into the wicket-keeper’s gloves after leaving the bowler’s hand. This method to generate runs can be made free of any risk with pre-planned strategy. Unlike, what the Skipper of the Indian cricket team did during the 5th ODI, against England on the 2nd of September 2007. He ran himself out, because there was no planning, in advance, for such runs.
Such method to generate runs can be made free of any risk, if the batting side adheres to the following strategy: -
(1) Firstly, the batsmen, in the middle, should fix in advance, each subsequent bowl to be attempted at, for such bye runs as mentioned above.
(2) Secondly, the striking batsman should always attempt to place the ball with cross-batted strokes, square of the wicket, at the vacant place of the field. Never, with straight bat, in the bowler’s direction. It is up to the striker batsmen to control the power on his strokes to place the ball in the vacant place of the field, appropriately. Such skill comes through regular practice, and experience. And,
(3) Thirdly, the non-striker batsman should dart off for the other end, at his full speed, as soon as the ball leaves the bowler’s hand, in the direction of the stumps at the wicket-keeper’s end.
However, the above mentioned strategy can be negated, if the respective bowlers vary the pace and trajectory of each successive bowling, not straying the pitch of the bowl beyond the distance between the good-length spot and the yorker-length spot, straight in the line of the stumps at the wicket-keeper’s end. And, the field is set accordingly.Want to post more such devices? Then, enable me to do so by “clicking” on the Ads. on this page and, other Web pages accessible through this page, regularly.
Such method to generate runs can be made free of any risk, if the batting side adheres to the following strategy: -
(1) Firstly, the batsmen, in the middle, should fix in advance, each subsequent bowl to be attempted at, for such bye runs as mentioned above.
(2) Secondly, the striking batsman should always attempt to place the ball with cross-batted strokes, square of the wicket, at the vacant place of the field. Never, with straight bat, in the bowler’s direction. It is up to the striker batsmen to control the power on his strokes to place the ball in the vacant place of the field, appropriately. Such skill comes through regular practice, and experience. And,
(3) Thirdly, the non-striker batsman should dart off for the other end, at his full speed, as soon as the ball leaves the bowler’s hand, in the direction of the stumps at the wicket-keeper’s end.
However, the above mentioned strategy can be negated, if the respective bowlers vary the pace and trajectory of each successive bowling, not straying the pitch of the bowl beyond the distance between the good-length spot and the yorker-length spot, straight in the line of the stumps at the wicket-keeper’s end. And, the field is set accordingly.Want to post more such devices? Then, enable me to do so by “clicking” on the Ads. on this page and, other Web pages accessible through this page, regularly.
Monday, June 18, 2007
In November last year, the corruption ridden electricity department of my area “inadvertently” disconnected the electricity supply at my house for non-payment of artificially inflated bills. My electricity supply was restored only after I formally, lawfully and, effectively utilised my "leverage" against such corruption-ridden “inadvertence”.
Meanwhile, a close relative of mine found that the neutral line of my found that the neutral line of my electricity-supply was not disconnected. That gave him the opportunity to utilise the potential difference between the neutral line and the metallic pipe line for the municipal water-supply at my house. There was enough potential difference to produce free electricity or 3 volt bulbs.
There should be plenty of such ready-made potential difference, all around, in the Nature, that can be utilised. People should also find out other devices that would give more powerful performance at lower consumption, unlike those available in Market.
An electrician of my area has, indeed, developed a device that consumes lesser electricity despite proportionally higher performance. I shall describe about his device as soon as he gets his device registered under the patent law.
Meanwhile, a close relative of mine found that the neutral line of my found that the neutral line of my electricity-supply was not disconnected. That gave him the opportunity to utilise the potential difference between the neutral line and the metallic pipe line for the municipal water-supply at my house. There was enough potential difference to produce free electricity or 3 volt bulbs.
There should be plenty of such ready-made potential difference, all around, in the Nature, that can be utilised. People should also find out other devices that would give more powerful performance at lower consumption, unlike those available in Market.
An electrician of my area has, indeed, developed a device that consumes lesser electricity despite proportionally higher performance. I shall describe about his device as soon as he gets his device registered under the patent law.
Tuesday, March 27, 2007
Pirated Software/CD/Floppies: Tracking Down The Sources
It is long, since my Blogs are not fetching appropriate money for me. Therefore, I am diversifying my activities on Internet.
The invasion of pirated Software/CD/Floppies, etc., is a major problem in the world of Internet. It creates monetary problems for the users, as well as the manufacturers of the genuine Software/CD/Floppies, etc..
I have, since, devised some methods to detect the respective source of any pirated Software/CD/Floppies, etc.. Any interested party may contact me at my e-mail address, for the purpose. My e-mail address can be found by browsing through my Blogs.
The service is free for all.
It is long, since my Blogs are not fetching appropriate money for me. Therefore, I am diversifying my activities on Internet.
The invasion of pirated Software/CD/Floppies, etc., is a major problem in the world of Internet. It creates monetary problems for the users, as well as the manufacturers of the genuine Software/CD/Floppies, etc..
I have, since, devised some methods to detect the respective source of any pirated Software/CD/Floppies, etc.. Any interested party may contact me at my e-mail address, for the purpose. My e-mail address can be found by browsing through my Blogs.
The service is free for all.
Subscribe to:
Posts (Atom)